General Temperature sensor Acceleration sensor Radio data transmission Battery
The thermometer hurts in the ear Check the correct fit of the degree° in the ear. Try to adjust the sensor where it hurts. Take special care that the sensor head does not press too deeply into the ear canal. If the ears are very sensitive to pressure, adjust the…
No temperature is displayed. If no temperature is displayed (–,- °C) and the sensor LED flashes white, there is an active Bluetooth connection between degree° and your smartphone but the monitored temperature is outside the displayed measuring range. See Troubleshooting > Display Ranges. If no temperature is displayed (–,- °C)…
The degree° thermometer is switched on, but there is no connection to your smartphone. As soon as the degree° is switched on it sends a Bluetooth signal and the status LED flashes blue. Check whether you have activated the Bluetooth connection on your smartphone and then connect to your degree°…
The degree° thermometer does not switch on. If the degree° does not switch on after removal from the box, either the battery is empty and needs to be charged or the device is defective. Please charge the device for one hour and try again afterwards. If the device is defective,…
Switch off the degree° Put the device back into the charging box to switch it off. Any remaining data in the buffer memory (RAM) will be deleted after 48 hours. Data in the flash memory is retained until it is overwritten. Uninstalling the ap When uninstalling the degree° App from…
In general, all generated data is buffered locally on the degree° device and ultimately on your smartphone. Real time transmission The temperature data is briefly buffered on the sensor before it is immediately sent to your smartphone when an authorized and active Bluetooth Low Energy connection is established. Buffering If…
We take the protection of your personal data very seriously. We treat your personal data confidentially and according to the legal data protection regulations as well as our data protection declaration. This privacy statement applies to our mobile iPhone and Android apps. It explains the type, purpose and scope of…